Showing posts with label not. Show all posts
Showing posts with label not. Show all posts
Tuesday, March 21, 2017
Why An Iron Ship Does Not Sink
Why An Iron Ship Does Not Sink
If you put a nail or a lump of iron in a vessel of water it sinks at once. A piece of wood of the same size floats. So, until fifty years or so ago, people thought all boats and ships must be built of wood, or they would sink.
Take a sheet-iron pan from the kitchen and put that on the water. It floats. It weighs just as much as the lump of iron that sinks, but the weight is spread or distributed over a larger volume of water That is all. It has been made lighter than the total amount of water it rests upon. A ship is just such a hollow vessel, whether made of iron or wood. When there is nothing in it, a ship stands high, almost on the surface of the water. As it is loaded with goods and people, it rides deeper. Load your sheet iron pan with a cargo of toys. Watch it go deeper. Dont fill it to the top. That would make it as heavy as if it were solid. Then it would sink.
If you live in a lake or sea-port town, you will find that all ships have a water-line painted plainly around the hull. This is the safety loading line. No ship owners are allowed to load a vessel so heavily that that water line sinks below the surface of the water. Air spaces must be left, to keep the ship and its cargo lighter than the water that is beneath them. In the old days overloaded wooden vessels often sank. Today, iron ships ride the ocean safely.
Source: http://chestofbooks.com/reference/The-New-Student-s-Reference-Work-Vol5/Why-An-Iron-Ship-Does-Not-Sink.html#.ViIG-fkrLIU#ixzz3ooQryes9
Available link for download
Thursday, February 23, 2017
How to fix stop c0000221 bad image checksum the image user32 dll is possible corrupt the header checksum does not match the computed checksum
How to fix stop c0000221 bad image checksum the image user32 dll is possible corrupt the header checksum does not match the computed checksum
Stop: c0000221 {bad image checksum}
the image user32.dll is possible corrupt. the header checksum does not match the computed checksum.![]() |
| Add caption |
Method 1: Extract a New Copy of the User32.dll File from the Windows XP CD
Method 2: Remove or Replace the Faulty RAM
Method 3: Replace hard disk or fix hdd bad sectors.
"how to fix Error! STOP:C0000221", "how to solve Error! STOP:C0000221", "how to fix stop: c0000221 {bad image checksum}", "how to solve stop: c0000221 {bad image checksum}"
Available link for download
Drive Not Opening issue Virus Remover Softwares
Drive Not Opening issue Virus Remover Softwares
With the popularity of USB removable media, more and more viruses started to appear that could take advantage of the ease at which these devices can be transferred from machine to machine using plug and play. It was quite easy to rewrite the Autorun.inf file to launch the malware on insertion of the drive because in general it is not write protected. Its not just on removable drives that the autorun file can be created on though, it can be burned to a CD/DVD and also created on local hard drives including the system drives.
1. Disk Heal
Disk Heal is a useful tool that restores the condition of your storage device after being infected by a virus. Although its not in development any more, Disk Heal is a useful tool that performs many functions, most of which are quite useful. While there are loads of tweaks you can apply to different areas of your system such as Control Panel, Internet Explorer, Appearance and Security, the Fix section is what makes the program more valuable to the user.
After installing and running Disk Heal, click on the Fix tab. In addition to being able to sort out the drive problem, it can also fix Folder options, Task Manager and Regedit being inaccessible after a virus infection. The option to fix the drive is at the top, and you simply enter the letter of the drive which has the problem into the small box and press the Fix button. If any other drives have a similar issue, repeat the process. Disk Heal doesnt actually delete the Autorun.inf file itself but blanks its contents rendering the autorun function ineffective. A reboot or logoff will be required to complete the process.
Theres also another useful cleanup function at the bottom to restore hidden files and folders that have been hidden by a virus and they cant be seen. Disk Heal is a standalone executable so can be copied from the Program Files folder to make it portable.
Download Disk Heal
2. FixDrive
If Disk Heal has functions you have no interest in and simply want to sort the problem of your drive not opening in My Computer, then FixDrive is what you want. The program is small (60KB) and portable so requires no installation. It is described by the developer as a tool to fix the issue of Network drives not opening when you double click on them, but the same principle applies to other drives such as C.
FixDrive couldnt be much easier to use, extract from the zip file and then run it, select the drive you want to repair from the selection box and click Fix. If there is an Autorun.inf present on the drive in question, it will be deleted completely. After a logoff or reboot, you should be able to open the drive on double click again.
Download FixDrive
3. Flash Disinfector
This tool is developed by sUBs who also created the ComboFix malware removal program. Its slightly different to the other tools above because it also has a limited ability to remove some autorun viruses while they are still attached to the inf file. In addition to USB flash drives, Flash Disinfector can remove the autorun file leftover from viruses on local system drives that are causing the folder to not open in My Computer.
Its very easy to use, just run Flash_Disinfector.exe and it will tell you to plug in your flash drive that is infected by malware. If you want to repair a fixed drive, just press the button to start. The screen will then go blank for a few seconds, then youll see a popup window saying Done!!. Once completed, all autorun files will be gone from your drives and replaced with a protected folder called Autorun.inf, this is quite normal and a preventative measure to stop future autorun virus issues.
If you actually dont want the autorun folder on your drive, it cant be deleted normally and use of the command prompt to remove is a quick way to do it. Open up a Command Prompt window (type cmd in the run box) and enter the following:
Attrib -R -S -H /S /D C:Autorun.inf
RD /S C:Autorun.inf
Press Y to confirm delete and the folder along with the dummy file will be removed. Obviously substitute C: for any drive letter you wish. The two commands above can also be used to delete the original autorun.inf manually if you have any problems with the listed tools for any reason.
Download Flash Disinfector
If Your Problem is not Autorun Related
Even though this problem is mostly related to the leftover Autorun.inf file, there is another way your drives in My Computer can be stopped from opening. A few incorrect settings in the Windows registry can also open other windows such as search or programs on double click similar to the Autorun issue. Windows Vista, 7 and 8 can all be affected as well as XP because similar registry keys are present in all versions of Windows.
This has a simple solution which research seems to suggest fixes the problem the majority of times with a single command typed into the Run dialog. Open Run (win key+R) and type:
regsvr32 /i shell32.dll
Re Registering the shell32.dll file resets a number of Windows shell functions that can possibly become corrupted causing various issues, including opening drives in My Computer.
Available link for download
Sunday, February 5, 2017
Bluetooth device was not discoverable or An error occured changes could not be saved and the bluetooth device may not be plugged in
Bluetooth device was not discoverable or An error occured changes could not be saved and the bluetooth device may not be plugged in
Solution:
1] Click Start > Run > type devmgmt.msc and hit enter.
2] Device Manager window will be opened and expand Bluetooth radios.
3] Right click on Wireless Bluetooth Module > Properties > Power Management tab.
4] By default windows turn off the bluetooth and wireless device.
5] Make sure that there is no tick mark in Allow computer to turn off this device to save power as shown in picture below.

6] Click OK to close the properties box.






1] Click Start > Run > type devmgmt.msc and hit enter.
2] Device Manager window will be opened and expand Bluetooth radios.
3] Right click on Wireless Bluetooth Module > Properties > Power Management tab.
4] By default windows turn off the bluetooth and wireless device.
5] Make sure that there is no tick mark in Allow computer to turn off this device to save power as shown in picture below.

6] Click OK to close the properties box.
7] Also expand the Network Adapters in the device manager window.
8] Right click on Wireless-N WLAN Half-Mini Card > Properties > Power Management tab
9] Make sure that there is no tick mark in Allow computer to turn off this device to save power.

10] If there is tick mark then the error will be pop-up saying your bluetooth device was not plugged in.
11] Now select Advanced tab > select Wake-up Mode > set Value as Disabled (or) None.

12] Click OK and close the Device Manager window.
13] Now right click the Bluetooth radio button in the notification area of the taskbar and open settings.
14] Put the tick mark near the following options
- Allow bluetooth devices to find this computer
- Allow bluetooth devices to connect to this computer
- Alert me when a new bluetooth device wants to connect

15] Now select the Share tab and put the tick mark near Allow remote devices to browse, send and receive pictures, music and other files.

16] Atlast click Apply and OK.
========================================================================
If the problem still exist then you have to check the bluetooth service.
1] Click Start > Run > type services.msc and hit enter.
2] Services window will be opened.
3] Locate the Bluetooth service and right click > properties.
4] Set the Startup type as Automatic and Start the service if it has Stopped.

5] Click Apply and OK.
6] Locate the Bluetooth Support service and right click > properties.
7] Set the Startup type as Automatic and Start the service if it has Stopped.
8] Click Apply and OK.
9] Similarly locate the WLAN AutoConfig service and repeat same procedure.
10] If you cant able to start the service, select the Dependencies tab and start all the services related to it by following the above steps.

Note: Also read my new post on "Bluetooth keyboard/mouse disconnects frequently in Windows 7 laptops"
Available link for download
Wednesday, January 11, 2017
Why is electrical power transmitted at low frequencies and not at high frequencies
Why is electrical power transmitted at low frequencies and not at high frequencies
GENERATION
and the frequency is given by :
f= P*N /120
Now to produce voltage at a high frequency , two things have to be increased :
Since the number of poles in this Alternator have increased (compared to two pole High speed turbogenerators rotating at 3000/3600 RPM at 50/60 Hz respectively) , the diameter of the machine will increase which will make the size of machine large.
Now that to produce power at High frequency , you would have to rotate the machine at high speeds which would require higher steam input for same amount of power at a higher frequency.
Higher input to alternator will deteriorate it mechanically. To paraphrase a high frequency alternator needs to be mechanically robust and thus will require a larger size and more material in construction.
TRANSMISSION
While C and G are shunt parameters of line *G being frequency independent*

If the voltage at high frequency is used to transmit power
DISTRIBUTION & UTILIZATION
Even in distribution , the high frequency AC will not be that efficient :
- Power is generated from Synchronous machines (Alternators) which rotate at a particular speed called the synchronous speed given by
and the frequency is given by :
f= P*N /120
Now to produce voltage at a high frequency , two things have to be increased :
- Number of poles in machine
- Speed of machine
Since the number of poles in this Alternator have increased (compared to two pole High speed turbogenerators rotating at 3000/3600 RPM at 50/60 Hz respectively) , the diameter of the machine will increase which will make the size of machine large.
Now that to produce power at High frequency , you would have to rotate the machine at high speeds which would require higher steam input for same amount of power at a higher frequency.
Higher input to alternator will deteriorate it mechanically. To paraphrase a high frequency alternator needs to be mechanically robust and thus will require a larger size and more material in construction.
TRANSMISSION
- Coming to your actual questions about transmission of power at high frequency , We need to realize the model of transmission line
While C and G are shunt parameters of line *G being frequency independent*
If the voltage at high frequency is used to transmit power
- Drop across inductor will increase as V = I*X =I*2*3.14*f*L (f being the frequency).
- A higher drop will cause the line voltage to sag.Hence the coveted flat voltage profile will not be obtained.
- The voltage will decrease with increase in length and it will be less most at the receiving end (where it is needed the most).
- Corona loss is directly proportional to frequency, hence the losses due to corona will increase
- This will cause more interference with communication/telephone lines.
- High losses in transmission wires due to skin effect.
- Because of skin effect , the cost of conductor material will increase as the conductor is not utilized fully at high frequencies.
- Economy of transmission is a major point while designing transmission lines . increasing the cost of conductor will make the system uneconomical
- Since the resistance due to skin effect increases ( assume Rac=1.6Rdc), line losses (I^2R ones) will increase and hence the power transmission capability will decrease
- FACTS devices or compensators will be required for reactive power demand/supply making the system even more costly.
DISTRIBUTION & UTILIZATION
Even in distribution , the high frequency AC will not be that efficient :
- We use a lot of power electronic devices. A high frequency will cause large switching losses.
- Harmonics of higher frequencies being fed back to grid , filter requirements might be there.
- Poor voltage regulation
- Possibility of thermal noise/shot noise /white noise (high frequency ) interference with home appliances
Available link for download
Labels:
and,
at,
electrical,
frequencies,
high,
is,
low,
not,
power,
transmitted,
why
Monday, December 5, 2016
Hard disk not found hard disk problem solutions
Hard disk not found hard disk problem solutions
How to fix a Computer Software and Hardware: Hard disk not found:
Hard disk not found Check/change ata/ide/sata cable. If your mother board old go to BIOS check BOOT options. Check/change hard disk p...
Hard disk not found Check/change ata/ide/sata cable. If your mother board old go to BIOS check BOOT options. Check/change hard disk p...
Available link for download
Sunday, December 4, 2016
My HP Laptop Boot device not found Hard disk 3F0
My HP Laptop Boot device not found Hard disk 3F0
How to fix hp laptop Boot device not found Hard disk (3F0) Fixmaybe this mg from hp laptop
How to fix hard disk 3f0 problem
boot device not found
go to bios setting >press F10 and it came up something... find legacy options and
change legacy options if enable change it disable.
if disable change it enable.
and press f10 for saving setting.
auto system restart and you see problem solve all ready.
my hp laptop Boot device not found Hard disk (3F0)
my hp compaq Boot device not found Hard disk (3F0)
thank you .
Available link for download
Saturday, November 12, 2016
Bluetooth device driver was not successfully installed or No driver found for your bluetooth peripheral device
Bluetooth device driver was not successfully installed or No driver found for your bluetooth peripheral device
You may receive this error while you installing the driver for bluetooth in your laptop (or) connecting a bluetooth device to your laptop.

Solution:
NOTE : Also read my new post on Bluetooth device was not discoverable

Solution:
- While installing the bluetooth driver, please make sure that you must have a bluetooth enabled device like mobile phone, headset, mouse etc near your laptop as discoverable so that the laptop recognize the nearby bluetooth device and complete the installation of the bluetooth peripheral device driver in your laptop.
- While connecting a bluetooth device, please make sure that the bluetooth adapter is ON. If either your laptop discovers your mobile device (or) the mobile device discovers your laptop then the solution is easy. You can try sending some files from your laptop or mobile device which discovers first and vice versa so that the bluetooth peripheral device driver installs completly.
NOTE : Also read my new post on Bluetooth device was not discoverable
Available link for download
Saturday, October 15, 2016
Network Controller is not working in Windows 7
Network Controller is not working in Windows 7
If you open Device Manager, an yellow mark is indicated in network adapters section and will display as Unknown device. Even if you install the driver that comes with the CD, an error message popups saying "Driver was not successfully installed" or "Windows could not find driver for this device".
For these cases, a correct device driver from the manufacturer website must be downloaded and installed.
Solution:
1] Download Unknown Devices v1.4.20 and extract the archive.
2] Run UnknownDevices.exe
3] It will display a list of unknown devices and their appropriate device drivers.

4] Note the manufacturer name or copy/paste in Google to find their respective websites to download the correct drivers for the device.
Available link for download
Wednesday, October 12, 2016
Password Management Strategies Do Not Have To Be Complicated
Password Management Strategies Do Not Have To Be Complicated

News outlets are regularly reporting tales of hacker devastation due to inefficient passcode strength. Although it is simple for users to change their passwords and optimize their security measures, according to PCWorld, there are simple strategies that businesses and consumers alike can consider in order to optimize their defenses from the start.
Tips for password fortification
Business 2 Community reported that password management software can do the work of creating complex and hard to hack passcodes without forcing the end user to memorize long strings of characters, across multiple accounts. With this cost-effective solution, the software will do this work for the customer, requiring minimal setup or maintenance. Furthermore, for businesses that need to manage various online presences over different account names, password management software provides users with an easy to use administrative interface.Single sign-on solutions (SSO) are also worthwhile investments because of their instant authentication capabilities. When this software is deployed, users can connect to their accounts instantly, without requiring troublesome and often frustrating reset validations. Additionally, this strategy prevents business professionals who manage multiple password-protected accounts from having to spend time constantly signing into them as they perform their daily tasks.
There can never be enough security when dealing with the Internet. People who are invested in preserving their online identity should consider these optimized password strategies.
Available link for download
Labels:
be,
complicated,
do,
have,
management,
not,
password,
strategies,
to
Sunday, October 2, 2016
Make Your PC Shut Down at Night But Only When You’re Not Using It
Make Your PC Shut Down at Night But Only When You’re Not Using It
If you normally like to power off your PC when youre not using it, do you ever forget and leave it on? Heres how to configure Windows to automatically power down at night, but only if youre not using the PC at the time.
To accomplish this, well setup a Task Scheduler job that tells the computer to shut down, and make sure to configure the rules so that it doesnt kick in if you are up late using the PC.
Create a Task Scheduler Job to Shut Down the PC
Youll need to open up Task Scheduler to create the new job, so open it up and click the Create Task link on the right-hand side.
Now youll want to give the task a name, and make sure to check the box for Run with highest privileges, since the shutdown utility requires admin access.
Now switch to the Triggers tab, click New, and then setup a schedule that makes sense for you, like every night at midnight.
Now flip over to the Actions tab, click New, and then enter shutdown into the Program box, and /S into the parameters box. If you want to force a shutdown and kill every app, you can use /S /F to force it to happen right away.
Next head to the Conditions tab, and make sure to check the box to only start the task if the computer is idle for more than x minutes. You can also choose to stop the task if the PC isnt idle to help make sure it doesnt kick in if you are on the PC.
Lastly, head to the Settings tab, and you can choose to restart the task every 30 minutes if the task failsthat way, if you are on the PC for a while past the normal time, the job will start up later on and shut down the PC.
Once youre done, your PC will shut down automatically. Enjoy!
Available link for download
Subscribe to:
Posts (Atom)
